MICROGENIUS - 2D Optical System
MICRO is mainly aimed at the two-dimensional control of components used in the aeronautics, automotive, textile machinery, electrical- electronic, home appliances, rubber industries, and in all those cases where a quick and accurate check is required. It is also indicated for pieces of series control. Its modular manufacturing allows the machine to adapt its performances according to the specific user needs. This can be made by personalizing the system with choosing among the following main components:
-
Lenses
-
Condensers
-
Camera
-
Mechanical components.
The operating principle consists in a standard or high definition lens also called telecentric which grants absolute precision, along with a camera shooting piece to be tested. After making the measurement program it will work by simply placing the piece on the worktable, the dedicated software will automatically detect the requested dimensions giving in real time the result, which will be available for any further data processing.
It is possible to store “n” measurement programs so that the software can recognize immediately which kind of measuring program should be used when the piece is placed on the worktable. No manual program selection is required. Differently from the most similar equipments, MICRO grants an uncommon and particular measuring program suitable for the specific user’s needs.
Main features
-
2D non-contact measurements.
-
Real-time checking.
-
Single button to store the data.
-
No sample alignment is needed.
-
Wide field depth.
-
High system flexibility and modularity.
-
Accessory assemble directly on the worktable.
-
Instrument placement directly into the production line.
-
No qualified personnel is required for the instrument use.
| |
