|
Noselab ATS, offers a line of raw matrial characterization machines that work in accordance to different standards and cover different needs.
We propose the following: |
 .................────────.................
.
.
The basic model of plastometers uses the gravimetric method. The heated material is extruded, manually cut at regular intervals.
.
 . |
 ............────────............
.
Extrusion Plastometer A-MeP.
A-MeP allows the
determination of the
Melt Flow Rate, basic
test to characterize thermoplastic ....
.
. |
 ...............────────............... .
MeP.
Automatic extrusion plastometer is a highly reliable instrument that can meet the most sophisticated laboratory requirements for production quality control. ...
.
. |
. ..................────────............--...
A-Melt .
Extrusion Plastometer with automatic cutting for the determination of the hot fluidity index of thermoplastic materials.....
.
.
. |
 ................────────................
.
Density Gradient.
It allows the determination of the density of solid materials at a temperature of 23°C .
In a measuring range between 0.84 and 2.6 g / cm³ based on the use of spheres with a known density.... .
. |
 ............────────............
.
Flow meters.
Bulk density apparatus are for the measurement and determination of the apparent density of the granular plastic materials and flowing powders through a hole of normalized dimensions....
.
. |
 .................────────.................
.
.
Determination of the setting
transformation time of
phenolic resins on a
thermo controller which
keeps a heavy....
.
|
 ............────────............ .
Melting Points.
The pulverized material is sealed between two glass slides and heated according to the Fisher Johns method...
.
. |
.................────────.................
.
.
|
............────────............
.
. |
