Raw Material Characterization  <---         

Flow meter 10016000  

Flow meter 10016000

 

Description

These devices allow the determination of flowability of plastic materials, pellets and powders. The below collecting cup enables the determination of apparent density (analytical weighing) of a known volume of material.

Flow meter according to ASTM D 1895 meth. A 

  •  Conical container made of stainless material, with a 9.5-mmdiameter hole, equipped with a lower fast lock.

  •  Stand made of steel and painted with epoxy resins, supporting the above container.

  •  Collecting cup for the flown material, with a volume of 100 cm3 ± 0.5 cm3)

  • Flow meter according to UNI 4267, ISO R 60, DIN 53468, BS meth. 501 A

For the determination of apparent density of moulding materials. The device is a funnel with a conical shape and a total height of 115 mm and include a supporting stand and a collecting cup.
Capacity 100 ml (± 0.5 ml) and 45 mm (± 5 mm) in diameter

 

Standards :

                                                                                  DIN-53468        DIN-53492     ASTM-D 1895 Método A    

 
In the pop up window you can download the Catalog (if it is not shown, please refresh or click F5)